Home/Heat Transfer Vinyl
  • These Silicone Sheets have a wide variety of uses.  They can be used to cover your heat transfer vinyls and printed heat transfer papers before pressing.  They can also be used to keep ink from bleeding onto your heat press and between layers of fabrics.  Each sheet can be reused multiple times (more than 10 times). Can be used with home iron or heat press. Product may come rolled if also ordered with vinyl and may need to be flattened under something like a book before putting into printer.
  • Product Details *Starred colors cannot be layered beneath another product* Self-adhesive PET liner Easy to cut and weed Special hotmelt for fast application at low temperature, preventing press marks Cut in mirror image Warm Peel Wash garment inside-out. Ok for hot wash. Ok for normal tumble dry. Ok for dry cleaning. Transfer Conditions: Cotton: Temp 265F, medium pressure for 5 seconds.   OR  Temp 300F medium pressure for 4 seconds.  OR  Temp 320F, medium pressure for 3 seconds. Polyester Acrylic: Temp 300, low pressure, 5 seconds Nylon: Pre-heat garment 5 seconds at 300F, then design 300F, low pressure for 5 seconds. Then remove PET liner, cover design with silicone paper and apply heat for another 10 seconds.
  • Product Details Self-adhesive PET liner Easy to cut and weed Product has textured feel and a high sparkle finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for normal tumble dry. Ok for dry cleaning. May be sublimated using indirect sublimation, either before or after pressing glitter to the garment Can be layered as final top coat Transfer Conditions: Temp 320°, medium pressure, 15 seconds. Peel warm.
  • Product Details Self Adhesive PET liner Easy to cut and weed Very soft and stretchy with a smooth finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for low tumble dry. Ok for dry cleaning.   Transfer Conditions: Temp 320°F for 15 seconds, peel warm
  • Product Details Heat transfer film since it has no adhesive backing Cut in mirror image Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener Peel hot or cold Can layer Semi-gloss finish Can be used with a Laser Cutter 90 microns/3.5 Mils Thick Presses at a low temp with low pressure Will not adhere to nylon Transfer Conditions: 305F, medium pressure for 10-15 seconds. Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
  • Product Details 300% Stretchability Self-adhesive PET liner Easy to cut and weed Matte, reflection-free surface Wash garment inside-out. Ok for hot wash.  Ok for normal tumble dry. Ok for dry cleaning. Cut in mirror image Transfer Conditions:  Temp 320°, medium pressure, 15 seconds.  Peel warm.
  • Product Details Self-adhesive PET liner Easy to cut and peel Cut in mirror image Designed for difficult fabrics Suitable for transfer onto Nylon and textiles with hydrophobic impregnation Wash garment inside-out. Ok for warm wash up to 105 deg. Ok for low tumble dry. Not Ok for dry cleaning.   Transfer Conditions: Temp 300-305F, medium pressure.  Pre-press garment 5 seconds (always protect with silicone paper or other garment protector).  Press design with medium pressure for 4 seconds.  Peel lukewarm. Cover with garment protector and press for additional 10 seconds.
  • Product Details Gives design a suede textured look with a raised feel Can layer on top of itself for even more dramatic look Pressure sensitive liner Cut in mirror image Peel hot or cold Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean. Transfer Conditions: Temp 311F, medium pressure for 10-15 seconds. Re-press if design lifts after initial press Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Flocked Blade: 4 Speed: 5 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
  • Product Details Easy Cutting and Weeding Pressure-sensitive carrier Semi-gloss finish Requires use of High Tack Mask Does not layer Do not cut in mirror image Use knockout/trapping method for a layered look Peel hot or cold Wait 24 hours before 1st wash. Machine wash cold / mild detergent. Dry on normal dryer setting. Do not dry clean or bleach. Transfer Conditions: 305F and pre-press garment.  Then press design for 10-15 seconds, then cover and reheat for additional 2-3 seconds.
  • Product Details *Starred colors cannot be layered beneath another product* Self-adhesive PET liner Easy to cut and weed Special hotmelt for fast application at low temperature, preventing press marks Cut in mirror image Warm Peel Wash garment inside-out. Ok for hot wash. Ok for normal tumble dry. Ok for dry cleaning. Transfer Conditions: Cotton: Temp 265F, medium pressure for 5 seconds.   OR  Temp 300F medium pressure for 4 seconds.  OR  Temp 320F, medium pressure for 3 seconds. Polyester Acrylic: Temp 300, low pressure, 5 seconds Nylon: Pre-heat garment 5 seconds at 300F, then design 300F, low pressure for 5 seconds. Then remove PET liner, cover design with silicone paper and apply heat for another 10 seconds.
  • Product Details Self Adhesive PET liner Easy to cut and weed Very soft and stretchy with a smooth finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for low tumble dry. Ok for dry cleaning.   Transfer Conditions: Temp 320°F for 15 seconds, peel warm
  • Product Details Self-adhesive PET liner Easy to cut and weed Product has textured feel and a high sparkle finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for normal tumble dry. Ok for dry cleaning. May be sublimated using indirect sublimation, either before or after pressing glitter to the garment Can be layered as final top coat Transfer Conditions: Temp 320°, medium pressure, 15 seconds. Peel warm.
  • Product Details Can layer Ideal for holiday t-shirts and costumes Appears as white in the daytime 3.5 mil thick Vibrant Glow Cut in mirror image Peel hot or cold Transfer Conditions: Temp 305F and pre-press garment for 2-3 seconds. Then press design with medium to firm pressure, for 10-15 seconds   Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 5 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Paper Pressure: More Blade: Fine-Point Blade (Standard)
  • Product Details Heat transfer film since it has no adhesive backing Cut in mirror image Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener Peel hot or cold Can layer Semi-gloss finish Can be used with a Laser Cutter 90 microns/3.5 Mils Thick Presses at a low temp with low pressure Will not adhere to nylon Transfer Conditions: 305F, medium pressure for 10-15 seconds. Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
  • Product Details 300% Stretchability Self-adhesive PET liner Easy to cut and weed Matte, reflection-free surface Wash garment inside-out. Ok for hot wash.  Ok for normal tumble dry. Ok for dry cleaning. Cut in mirror image Transfer Conditions:  Temp 320°, medium pressure, 15 seconds.  Peel warm.
  • Product Details Self-adhesive PET liner Easy to cut and peel Cut in mirror image Designed for difficult fabrics Suitable for transfer onto Nylon and textiles with hydrophobic impregnation Wash garment inside-out. Ok for warm wash up to 105 deg. Ok for low tumble dry. Not Ok for dry cleaning.   Transfer Conditions: Temp 300-305F, medium pressure.  Pre-press garment 5 seconds (always protect with silicone paper or other garment protector).  Press design with medium pressure for 4 seconds.  Peel lukewarm. Cover with garment protector and press for additional 10 seconds.
Go to Top