Home/Heat Transfer Vinyl
  • Product Details Heat transfer film since it has no adhesive backing Cut in mirror image Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener Peel hot or cold Can layer Semi-gloss finish Can be used with a Laser Cutter 90 microns/3.5 Mils Thick Presses at a low temp with low pressure Will not adhere to nylon Transfer Conditions: 305F, medium pressure for 10-15 seconds. Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
  • Product Details Heat transfer film since it has no adhesive backing Cut in mirror image Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener Peel hot or cold Can layer Semi-gloss finish Can be used with a Laser Cutter 90 microns/3.5 Mils Thick Presses at a low temp with low pressure Will not adhere to nylon Transfer Conditions: 305F, medium pressure for 10-15 seconds. Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
  • Product Details Heat transfer film since it has no adhesive backing Cut in mirror image Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener Peel hot or cold Can layer Semi-gloss finish Can be used with a Laser Cutter 90 microns/3.5 Mils Thick Presses at a low temp with low pressure Will not adhere to nylon Transfer Conditions: 305F, medium pressure for 10-15 seconds. Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
  • Product Details Easy Cutting and Weeding Pressure-sensitive carrier Semi-gloss finish Requires use of High Tack Mask Does not layer Do not cut in mirror image Use knockout/trapping method for a layered look Peel hot or cold Wait 24 hours before 1st wash. Machine wash cold / mild detergent. Dry on normal dryer setting. Do not dry clean or bleach. Transfer Conditions: 305F and pre-press garment.  Then press design for 10-15 seconds, then cover and reheat for additional 2-3 seconds.
  • Product Details Easy Cutting and Weeding Pressure-sensitive carrier Semi-gloss finish Requires use of High Tack Mask Does not layer Do not cut in mirror image Use knockout/trapping method for a layered look Peel hot or cold Wait 24 hours before 1st wash. Machine wash cold / mild detergent. Dry on normal dryer setting. Do not dry clean or bleach. Transfer Conditions: 305F and pre-press garment.  Then press design for 10-15 seconds, then cover and reheat for additional 2-3 seconds.
  • Product Details Easy Cutting and Weeding Pressure-sensitive carrier Semi-gloss finish Requires use of High Tack Mask Does not layer Do not cut in mirror image Use knockout/trapping method for a layered look Peel hot or cold Wait 24 hours before 1st wash. Machine wash cold / mild detergent. Dry on normal dryer setting. Do not dry clean or bleach. Transfer Conditions: 305F and pre-press garment.  Then press design for 10-15 seconds, then cover and reheat for additional 2-3 seconds.
  • Product Details *Starred colors cannot be layered beneath another product* Self-adhesive PET liner Easy to cut and weed Special hotmelt for fast application at low temperature, preventing press marks Cut in mirror image Warm Peel Wash garment inside-out. Ok for hot wash. Ok for normal tumble dry. Ok for dry cleaning. Transfer Conditions: Cotton: Temp 265F, medium pressure for 5 seconds.   OR  Temp 300F medium pressure for 4 seconds.  OR  Temp 320F, medium pressure for 3 seconds. Polyester Acrylic: Temp 300, low pressure, 5 seconds Nylon: Pre-heat garment 5 seconds at 300F, then design 300F, low pressure for 5 seconds. Then remove PET liner, cover design with silicone paper and apply heat for another 10 seconds.
  • Product Details *Starred colors cannot be layered beneath another product* Self-adhesive PET liner Easy to cut and weed Special hotmelt for fast application at low temperature, preventing press marks Cut in mirror image Warm Peel Wash garment inside-out. Ok for hot wash. Ok for normal tumble dry. Ok for dry cleaning. Transfer Conditions: Cotton: Temp 265F, medium pressure for 5 seconds.   OR  Temp 300F medium pressure for 4 seconds.  OR  Temp 320F, medium pressure for 3 seconds. Polyester Acrylic: Temp 300, low pressure, 5 seconds Nylon: Pre-heat garment 5 seconds at 300F, then design 300F, low pressure for 5 seconds. Then remove PET liner, cover design with silicone paper and apply heat for another 10 seconds.
  • Product Details *Starred colors cannot be layered beneath another product* Self-adhesive PET liner Easy to cut and weed Special hotmelt for fast application at low temperature, preventing press marks Cut in mirror image Warm Peel Wash garment inside-out. Ok for hot wash. Ok for normal tumble dry. Ok for dry cleaning. Transfer Conditions: Cotton: Temp 265F, medium pressure for 5 seconds.   OR  Temp 300F medium pressure for 4 seconds.  OR  Temp 320F, medium pressure for 3 seconds. Polyester Acrylic: Temp 300, low pressure, 5 seconds Nylon: Pre-heat garment 5 seconds at 300F, then design 300F, low pressure for 5 seconds. Then remove PET liner, cover design with silicone paper and apply heat for another 10 seconds.
  • Product Details Self-adhesive PET liner Easy to cut and weed Product has textured feel and a high sparkle finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for normal tumble dry. Ok for dry cleaning. May be sublimated using indirect sublimation, either before or after pressing glitter to the garment Can be layered as final top coat Transfer Conditions: Temp 320°, medium pressure, 15 seconds. Peel warm.
  • Product Details Self-adhesive PET liner Easy to cut and weed Product has textured feel and a high sparkle finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for normal tumble dry. Ok for dry cleaning. May be sublimated using indirect sublimation, either before or after pressing glitter to the garment Can be layered as final top coat Transfer Conditions: Temp 320°, medium pressure, 15 seconds. Peel warm.
  • Product Details Self-adhesive PET liner Easy to cut and weed Product has textured feel and a high sparkle finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for normal tumble dry. Ok for dry cleaning. May be sublimated using indirect sublimation, either before or after pressing glitter to the garment Can be layered as final top coat Transfer Conditions: Temp 320°, medium pressure, 15 seconds. Peel warm.
  • Product Details Self Adhesive PET liner Easy to cut and weed Very soft and stretchy with a smooth finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for low tumble dry. Ok for dry cleaning.   Transfer Conditions: Temp 320°F for 15 seconds, peel warm
  • Product Details Self Adhesive PET liner Easy to cut and weed Very soft and stretchy with a smooth finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for low tumble dry. Ok for dry cleaning.   Transfer Conditions: Temp 320°F for 15 seconds, peel warm
  • Product Details Self Adhesive PET liner Easy to cut and weed Very soft and stretchy with a smooth finish Cut in mirror image Wash garment inside-out. Ok for hot wash.  Ok for low tumble dry. Ok for dry cleaning.   Transfer Conditions: Temp 320°F for 15 seconds, peel warm
  • Product Details Can layer Ideal for holiday t-shirts and costumes Appears as white in the daytime 3.5 mil thick Vibrant Glow Cut in mirror image Peel hot or cold Transfer Conditions: Temp 305F and pre-press garment for 2-3 seconds. Then press design with medium to firm pressure, for 10-15 seconds   Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 5 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Paper Pressure: More Blade: Fine-Point Blade (Standard)
Go to Top