Description

Product Details

INKJET Printers ONLY

Application Instructions:

1. Print image on right side of paper (not the side with the printed paper name). Do not mirror image your design. If you are using a cutter/plotter such as Cricut or Silhouette, be sure to add registration marks before printing.
2. Can be trimmed with cutter/plotter such as Cricut or Silhouette, or can be trimmed with scissors if desired. This is a thin paper, so test cut is recommended. This product has more than one layer, so when you cut with cutter/plotter you are cutting around the top layer only and not all the way through. So once cut, you will peel just the top layer off.
3. Once trimmed place on fabric, right side up (printed image should be facing you).
4. You MUST cover with silicone sheet before pressing.
5. This product can be pressed with an iron or heat press. Press at 350-375°for 20-30 seconds on medium to high pressure.
6. Let cool completely before peeling. Once cool, peel with smooth even motion.

Tips:

1. Do not use photo quality printing because it will apply too much ink and therefore could run or bleed when washing. Just print with normal settings.
2. You can use a push pin to help get top layer peeled off if you can’t get it started with your nail
3. You can use it on a light or white garment, but it is a little heavier feeling on light fabrics vs using the Jet Pro SS that is made for light fabrics.
4. Not compatible with application masks
5. Wash cold, inside out.
6. Will last longer when not printed with HP, Brother or Dell printers
7. For use with pigment inkjet printers – not compatible with thermal or dye-based inks
8. Wait 24 hours before first washing
9. Do not use bleach and dry on low heat setting

Product may come rolled if also ordered with vinyl and may need to be flattened under something like a book before putting into printer.